Roofing the house is not a small task, it requires all the skills and a manner to complete the work. effectively. Every step has some important and the Residential Roofing Services in Brampton can give you ideas accordingly. If you are not aware of all those steps then this article is for you. Here we have given the step-by-step process of roof installation.
# Remove the old roof
The first step is roofing is to remove the old roof, they need to make sure that they are stripping it correctly so that new installations can be done easily. All the debris are kept at a place in trash bin, which they are throwing because of no use.
Now the next step is Underpayment that works to keep roof waterproof and also prevents the attack of snow, heat, and rainy water. They need to make sure about the requirement of underlayment so that it can be applied properly.
# Cover the Underlayment with Tar Paper
The next step is to cover Underlayment with Tar Paper, which can be available easily at an home improvement store. This overlapping will be very helpful to improve the waterproofing feature on roof and will make it a bit stronger.
The next step is to add flashing over very corner. If you want to give your home an aesthetically amazing then you can install drop edge flashing. Well, the flashing can be applied anywhere whether it is roof or chimney to make things look more finished.
# Mark for Shingles
Now the next thing is to mark things with chalk for proper and effective way of work. Start making vertical lines for better positioning and then you can draw things at your convenience. There are also some Residential Roof Repair and Replacement Service who can also guide throughout the process.
# Install the Shingles
The next thing is to install shingles as per the mark you have made. It depends on you whether you are going with Asphalt Shingles or something else. This is something called as the exterior layer of your building.
# Nail Down the Layers
Well, roof installation has the main purpose is to get some rid of heavy rain or snowfall. That’s why nailing down the layers is something very important. It depends on you how will you keep the strength and normally 4 nails are used per shingle.
# Cap the Ridge
The next and a very important step is to cap the ridge. It is the portion where both sides of roof meets and installing the Caps can provide you more security over everything. But many people avoid, as they don’t consider it valuable.
# Clean Up and remove all Debris
Well, the next and final step is to clean up and remove all the debris. As the whole work gets completed and now it is the perfect time to give a proper finish by removing nail and Debris from it.